If this is the problem you are experiencing, read on to see how the sound can be synced. To fix the sound delay on your TCL TV, go to 'Settings' and select 'Audio.'. From here you will go to 'Advanced Settings' > 'Digital Audio Out' > select 'Pass Through' > 'Back' > 'Sound Mode' > and click on either the 'Live Turn it on and off if it isn't, and reset it so the connection can become stronger again. Try disconnecting and reconnecting the ethernet cable, as there could just be a temporary loss of connection. If all of this fails, just restart your TV and your router and reboot the whole system. 3. Won't Mirror Laptop. While troubleshooting, you might be required to restart your TCL Roku TV. Below are the step-by-step instructions: Press on your remote to open the main screen. Scroll up or down and select Settings. Press the right arrow button and select System. Press the right arrow button and select Power. Restart the TV. Press the power button on your TV. The location of the power button on most models in underneath TCL logo on the bottom of the TV or behind the TV towards the right edge. Please consult your user's manual for the exact location. Unplug the TV from the power outlet. After 30 seconds, plug the TV back. Factory reset the TV.

1 Change Default Power On Screen. Push the Home button on your Roku TV remote. On the left-hand side, select Settings. In Settings, select System > Power > Power On. Here, you can select the option that best suits you. The default is " Home screen ", the Roku TV home screen, giving you all the options. Once the option you want has the check

And. If you hit the home button on the Firestick it just goes to whatever input the Firestick is. OK to launch directly onto fire stick, First use your TCL Roku TV remote and power on. press the Home button on the TCL Roku remote control (looks like a little house) then go to settings-then system- then select power. 05-18-2021 04:59 PM TCL Roku TV stuck at red startup screen I have a TCL Roku TV (Model A105X). A couple nights ago, the TV just turned itself on and got stuck in the red startup screen. It sits there for a bunch of seconds then reboots only to end up in the same screen, and repeats forever. I have tried a bunch of things.

The best I could do was assign the "TV" button on the remote to an HDMI input since I don't use the built-in TV tuner anyway. I use CEC, so the power button on the TV remote turns on my receiver, then I hit that TV button to switch inputs and automatically power-on my Nvidia Shield. Your model might have something similar in the settings. I'll

QIZUo.
  • 74vmgooc7h.pages.dev/494
  • 74vmgooc7h.pages.dev/411
  • 74vmgooc7h.pages.dev/59
  • 74vmgooc7h.pages.dev/327
  • 74vmgooc7h.pages.dev/176
  • 74vmgooc7h.pages.dev/262
  • 74vmgooc7h.pages.dev/142
  • 74vmgooc7h.pages.dev/283

    • tcl tv startup screen